EasyManua.ls Logo

TP-Link Archer VR200 - Page 104

TP-Link Archer VR200
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
100
7 ) Connect to wireless network.
¾ If you can find other wireless network except your own, please follow the steps
below:
1. Check the WLAN LED indicator on your wireless router/modem;
2. Make sure your computer/device is still in the range of your router/modem, move
closer if it is currently too far away;
3. Go to Advanced > Wireless > Advanced Settings page, and check the wireless
router settings, double check your Wireless Name , make sure the Region/Country
is selected correctly and the SSID is not hided;
Note:
Different countries have different laws about wireless channel. For example, USA allows 2.4GHz channel from 1
to 11, while UK allows from 1 to 13.If you select the Region as UK or the Channel as 12/13 while you are in USA,
your computer might not be able to pick up the signal.
4. Connect to wireless network.
¾ If you can find your wireless network but fail to connect, please follow the steps
below:
1. Authenticating problem, password mismatch.
1 ) Sometimes it will ask you to type in a PIN number when you connect to the
wireless network for the first time. This PIN number is different from the Wireless

Table of Contents