Quick Installation Guide
AC1200 Wireless VDSL/ADSL Modem Router
Connect the Hardware
Configure the Modem Router
Enjoy the Internet
Phone Jack Power Adapter
Phone Cable
VR400
PHONE
LINE
MODEM
Now you can enjoy your Internet.
If you want more advanced settings, please refer to the User Guide on TP-LINK ocial website at www.tp-link.com.
3 Push in to turn on the
modem router.
Wired
Wireless
1
DSL Splitter
Phone (Optional)
4 Verify that the following LEDs turn stable
before continuing with the conguration.
Note: The DSL LED takes about 1 to 2 minutes to stabilize.
Power On OnDSL
Ethernet Cable
Modem Router
1 Connecting your computer to the modem router via a wired
or wireless connection
Connect wirelessly by using the SSID
(network name) and Wireless
Password printed on the product label
at the bottom of the modem router.
2 Configuring the modem router via a web browser
http://tplinkmodem.net
HighMiddleLow
Save
Confirm Password
New Password
A Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1.
Create a new password (1-15 characters) and click Save.
Note: If the login page does not appear, please refer to FAQ->Q1.
C Select your Region and Time Zone, then click Next. Follow the step-by-step
instructions of the Quick Setup to complete the initial conguration.
B Enter the password you created and click Log in.
Note: For subsequent logins, you only need to enter the password that you have created.
2
LAN1 LAN2 LAN3 LAN4/WAN
If you don’t need the phone service, just directly
connect the modem router to the phone jack with
the provided phone cable, then follow steps 3 and
4 to complete the hardware connection.
DSL
LAN1 LAN2 LAN3 LAN4/WAN
To Next Page
General
Weight and Dimensions
