1
Quick Installation Guide
AX1800 Dual-Band Wi-Fi 6 VDSL/ADSL Modem Router
Archer VX1800v
Connect your analog phone to the PHONE port on the modem router's
back panel.
2
Connect the modem router to
the DSL splitter.
Modem Router
3
Connect the DSL splitter to the phone jack.
Note: If you won’t use the traditional landline phone service, you
can directly connect the modem router to the phone jack.
2
DSL Splitter
Phone Jack
Push in to turn on the
modem router.
4
1
Attach the antennas.
Wait about 1 minute until the DSL LED
turns solid on.
5
please wait a little longer. If the DSL LED still does
not turn solid on, please refer to Q3 of the FAQ.
Power Adapter
Note: If the DSL LED is still ashing after one minute,
Set up the Modem Router
Connect the Phone
ON/OFF
PHONE
7106510218
REV1.0.0©2023 TP-Link
To Next Page
Need help?
General
