TP-Link Deco BE65 - 4. Plug in your Deco; 5. Wait until Decos LED pulses blue; 6. Specify your Decos location

4
4. Plug in your Deco
Power o your modem. Connect your Deco to
the modem and power them both on.
If you don't have a modem, connect your
Deco directly to the Ethernet outlet.
5. Wait until Deco's LED pulses blue
Wait until your Deco's LED pulses blue, then
your phone/tablet will connect to the Deco's
default Wi-Fi automatically.
6. Specify your Deco's location
Select or custom a location for your Deco.
The location will be used as the name of your
Deco.