Need help?Do you have a question about the TP-Link Deco W6000 and is the answer not in the manual?
General| Wi-Fi Standard | Wi-Fi 6 (802.11ax) |
|---|---|
| Maximum Wi-Fi Speed | 6000 Mbps |
| Frequency | 2.4 GHz and 5 GHz |
| Processor | Quad-core |
| RAM | 512 MB |
| Mesh Technology | Yes |
| MU-MIMO | Yes |
| OFDMA | Yes |
| Beamforming | Yes |
| Parental Controls | Yes |
| Guest Network | Yes |
| App Management | TP-Link Deco App |
| Storage | 128 MB |
| Security Protocols | WPA3 |
| Antenna Type | Internal |
| Compatibility | Compatible with all Wi-Fi devices |
Instructions on how to get the Deco app from app stores or QR codes.
Guides users through logging in or creating a TP-Link ID for the app.
Prompts users to select their specific Deco model from a list.
Steps for connecting the Deco to the modem and powering on.
Allows users to assign a physical location name to their Deco unit.
Guides users to select and configure their internet connection type.
Instructs users to set a network name (SSID) and password.
Instructs users to connect their phone/tablet to the new Deco Wi-Fi network.
Provides an overview of the network status, connected clients, and speeds.
Access points for creating automated tasks and shortcuts.
Entry point to the HomeShield section for enhanced security features.
Link to access various router settings and advanced features.
Step-by-step guide to access the 'Add Decos' feature in the app.
Instructs users to choose the model of the Deco they wish to add.
How to check if all Deco units are online or offline.
How to view specific Deco information like IP, MAC, and connected clients.
Guidance on checking the current download and upload speeds of a Deco.
How to customize the location name and other settings for a Deco unit.
Steps to initiate the creation of a new shortcut in the app.
Defining the specific action the shortcut will perform.
Selecting the category of action (e.g., lights, switches).
Selecting the target device for the shortcut's action.
Configuring how the action executes, including duration and turn on/off.
Assigning a name and icon to the created shortcut for easy identification.
How to trigger the created shortcut to perform its action.
Steps to begin creating a new automation rule in the app.
Defining the time period or conditions for the automation to run.
Specifying the event or condition that will initiate the automation.
Choosing the type of trigger, such as device status or network events.
Specifying the device and its status that will act as the automation trigger.
Defining the action that will be performed when the trigger is met.
Choosing the device and its state for the automation's action.
Assigning a descriptive name to the created automation rule.
How to change the main network name, password, and hide the SSID.
Solutions for when the Deco app cannot find the main Deco unit.
Solutions for when the Deco app cannot find a satellite Deco unit.
Steps to resolve issues during the internet connection testing phase.
Guidance for when wireless devices are unable to connect to the Deco network.
Solutions for when the Deco network suddenly loses internet connectivity.
Steps to resolve issues if the Deco mobile application is not working properly.
To Next Page