Need help?Do you have a question about the TP-Link TL-WR1043N and is the answer not in the manual?
General| VPN support | PPTP, L2TP, IPSec |
|---|---|
| Ethernet LAN | Yes |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Supports ISDN connection | No |
| Ethernet LAN interface type | Gigabit Ethernet |
| Memory card slot(s) | - |
| USB 2.0 ports quantity | 1 |
| Ethernet LAN (RJ-45) ports | 4 |
| Antennas quantity | 3 |
| Antenna connector type | RP-SMA |
| Antenna gain level (max) | 5 dBi |
| Output current | 0.85 A |
| Output voltage | 9 V |
| Power source type | DC |
| Wi-Fi band | Single-band (2.4 GHz) |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| WLAN data transfer rate (max) | 450 Mbit/s |
| Security algorithms | 64-bit WEP, 128-bit WEP, 152-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK |
| Supported network protocols | IPv4, IPv6 |
| Certification | CE, FCC, RoHS |
| Cables included | LAN (RJ-45) |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Product type | Tabletop router |
| Product color | Blue |
Weight and Dimensions| Depth | 148 mm |
|---|---|
| Width | 225 mm |
| Height | 33 mm |
Provides an overview of the router's features and benefits for SOHO networks.
Details the physical connections needed to set up the router, including modem and power.
Explains the procedure for accessing and logging into the router's web management interface.
Guides users through the automated internet setup process using the built-in wizard.
Provides detailed steps for manual internet connection configuration via various types.
Instructions for configuring the router for IPv6 internet service from your ISP.
Features for managing internet access and content filtering for specific users or devices.
Details on using SPI Firewall and DoS Protection for enhanced network security.
How to allow or block specific devices from accessing the network using lists.
Method to prevent ARP spoofing by binding IP to MAC addresses for security.
Procedures for updating the router's firmware via online or manual methods.
Steps to diagnose and fix internet connectivity problems after initial setup.
To Next Page
