2
Appearance
Each Deco has an LED that changes color according to its status, a WPS button, two 2.5 Gbps WAN/LAN ports, a 10 Gbps WAN/LAN port, a 10 Gbps
RJ45/SFP+ WAN/LAN Combo port, a USB 3.0 port, a power slot, and a Reset button.
See the explanation below:
Tip: The product label can be found at the bottom of the product.
Pulse Yellow:
Deco is resetting.
Solid Yellow:
Deco is starting up.
Pulse Blue:
Deco is ready for setup.
Solid Blue:
Deco is setting up.
Pulse Green:
Deco is upgrading rmware.
Solid Green:
Deco is all set up and connected.
Pulse Red:
The satellite Deco is disconnected
from the main Deco.
Solid Red:
Deco has an issue.
For connecting Deco to your modem, the Ethernet outlet,
or for other internet services.
Press this WPS button, and immediately press the WPS button
on your client device to start the WPS process.
For connecting a USB storage device to Deco.
For connecting Deco to your modem, the Ethernet outlet,
or for other internet services.
Use Deco’s Combo pair. The Combo pair includes an Ethernet port and
an SFP+ port. Only one port in the pair can be used at a time.
For connecting Deco to the power socket via the provided power adapter.
2× 2.5 Gbps WAN/LAN Ports
WPS Button
Power Slot
Press for 1 second and release to reset Deco to factory default settings. The light
changing from pulsing yellow to solid yellow indicated a successful reset.
Reset Button
10 Gbps WAN/LAN Port
10 Gbps RJ45/SFP+ WAN/LAN Combo Port
1× USB 3.0 Port
To Next Page
Loading...
Need help?
General
