TP-Link Deco X25 User Manual

2
Appearance
Each Deco has an LED that changes color according to its status, two RJ-45 Ethernet ports, a power slot, and a Reset button.
See the explanation below:
Tip: The product label can be found at the bottom of the product.
Pulse Yellow:
Deco is resetting.
Solid Yellow:
Deco is starting up.
Pulse Blue:
Deco is ready for setup.
Solid Blue:
Deco is setting up.
Pulse Green:
Deco is upgrading rmware.
Solid Green:
Deco is all set up and connected
to internet.
Pulse Red:
The satellite Deco is disconnected
from main Deco.
Solid Red:
Deco has an issue.
Ethernet Ports:
For connecting Deco to your modem, the Ethernet outlet,
or for other internet services in Wireless Router mode.
Reset Button:
Press for 1 second and release to reset Deco to factory
default settings. The light changing from pulsing yellow to
solid yellow indicates a successful reset.
Power Slot:
For connecting Deco to the power socket via the provided
power adapter.

TP-Link Deco X25 Specifications

General

Wi-Fi Standard	Wi-Fi 6
Security	WPA3
Antenna Type	Internal Antennas
MU-MIMO	Yes
OFDMA	Yes
Beamforming	Yes
Parental Controls	Yes
Guest Network	Yes
Power	12V/1A
Wireless Standards	IEEE 802.11a/b/g/n/ac/ax
Maximum Devices	150
Processor	Quad-Core
Memory	512 MB
Compatibility	Works with Alexa
Coverage	Up to 2, 000 sq. ft.
Ethernet Ports	2 x Gigabit Ethernet ports per unit