TP-Link Deco X60 - Remove or Reboot Deco; Check Deco Status Before Action; Perform Deco Removal or Reboot; Factory Reset via Button

13
Remove/Reboot Deco
You can remove or reboot your Deco easily on the Deco app. Follow the steps below.
Tap to check all Deco's status Tap to remove or reboot the Deco
Note: If the LED light of Deco does not turns
pulsing blue after tapping Remove, refer to
Appearance to press the Reset button to reset it.
Tap a Deco unit to enter the details