2
Appearance
Each Deco has an LED that changes color according to its status, two Gigabit ports, an advanced 2.5 Gbps port, a power slot, and a reset button.
See the explanation below:
Tip: The product label can be found at the bottom of the product.
Pulse Yellow:
Deco is resetting.
Solid Yellow:
Deco is starting up.
Pulse Blue:
Deco is ready for setup.
Solid Blue:
Deco is setting up.
Pulse Green:
Deco is upgrading rmware.
Solid Green:
Deco is all set up and connected.
Pulse Red:
The satellite Deco is disconnected
from the main Deco.
Solid Red:
Deco has an issue.
Reset Button:
Press for 1 second and release to reset Deco to factory
default settings. The light changing from pulsing yellow to
solid yellow indicates a successful reset.
2× Gigabit ports
1× 2.5 Gbps port
Power Slot:
For connecting Deco to the power socket via the provided
power adapter.
Multi-Gig Internet Connection:
1× 2.5 Gbps port and 2× Gigabit ports make full use of
gigabit speeds from your local ISP. WAN/LAN support
meets all your internet demands.
To Next Page
Loading...
