167
Chapter 18
Manage Your Router
3. Enable Port Mirroring.
4. Select a LAN port to mirror network packets of the WAN port.
5. Set a Timeout duration after which Port Mirroring will disable automatically. If you
set Timeout to 0 seconds, Port Mirroring will not disable automatically.
6. Save the settings.
18. 13. TR369 Settings
TR-369 is an open standards Device Management specification that enables remote
management of customer-premises equipment (CPE) over an Internet Protocol (IP)
network. The specification covers both residential and business CPE, and defines a
set of objects and corresponding actions that can be performed on those objects. The
purpose of the specification is to provide a consistent, interoperable way for Service
Providers to manage the growing variety of CPE in their networks.
TR-369 builds on existing TR-069 specifications, adding support for new device types
and use cases while maintaining backwards compatibility. As a result, TR-369 provides
a flexible and extensible framework that can be used to manage today’s CPE, as well as
tomorrow’s.
1. Visit http://tplinkwifi.net or http://192.168.0.1, and log in with the password you set
for the router.
2. Go to Advanced > System Tools > TR369 Settings
3. Click Add to add an TR369 Connection entry for your device.
To Next Page
Loading...
