TP-Link HS110 - Smart Plug Panel Layout and Indicators

Chapter 1. Introduction 3
1.3 Panel Layout
Button
Description
(Settings button)
Press this button until the Wi-Fi LED blinks amber and green alternately (about 5
seconds) to initiate the app-config process.
Press and hold until the Wi-Fi LED blinks amber rapidly (about 10 seconds) to reset
the Smart Plug to factory defaults.
LED
Status
Indication
(Wi-Fi LED)!
Blink
Amber and Green: App-config mode initiated.
Green: Connecting to the network.
Amber: Factory reset.
On
Green: Connected to the network.
Amber: Rebooting.
Red: No network connection.
(Power LED)!
On
The Smart Plug is switched on.
Off
The Smart Plug is switched off.
Settings Button
Wi-Fi LED
Power LED
* Image may differ from actual product
due to different regional power
specifications. Here we use the U.S.
version as an example.