TP-Link M5360 - Advanced Configuration

3
English
Section B:Enter the PIN Code
Refer to Section A to establish a wireless connection.1.
Open your web browser and type 2. http://192.168.0.1 into the address bar, then
enter the password, which is admin by default.
Choose "3. Advanced->Dial-up->PIN Management", then enter the correct PIN
code according to your ISP and click Unlock for the settings to take effect.
* Advanced conguration
For advanced conguration, please enter the web-management page:
Open your web browser and type
http://192.168.0.1
into the address bar,
then enter the password,which is
admin
by default.
FAQ1.What should I do if I cannot log into the web-management
page?
Verify that your device is connecting to the M5360.1.
Verify that you entered the correct IP address http://192.168.0.1.2.
Verify that your device is obtaining an IP address automatically.3.
FAQ2.What should I do if I cannot access the Internet?
Tip1. Check the LAN connection
Open your web browser and type http://192.168.0.1 in the address 1.
bar,and then enter the password, which is admin by default.
Check if you can log into the web-management page successfully. If 2.
not,please refer to FAQ 1 and retry.
Tip2. Check your ISP parameters
Open your web browser and type1. http://192.168.0.1 into the address
bar, then enter the password, which is admin by default.
Choose "2. Advanced->Dial-up->Profile Management" to verify the
parameters are correct with your ISP. These parameters include APN,
Dial Number, User name and Password.
If these settings are not correct, please click 3. Create to create a new
prole with the correct parameters, and select Dial-up to choose the
new prole from the Prole List.
FAQ(Frequently Asked Questions)