TP-Link M5360 - Chapter 2. Hardware Installation; 2.1 Environment Requirements; 2.2 Hardware Installation

M5360
3G Mobile Wi-Fi, 5200mAh Power Bank User Guide
-5-
Chapter 2. Hardware Installation
2.1 Environment Requirements
 Place the Device in a well-ventilated place far from any heater or heating vent
 Avoid direct irradiation of any strong light (such as sunlight)
 Keep at least 2 inches (5 cm) of clear space around the Device
 Operating Temperature: 0℃~40℃ (32℉~104℉)
 Operating Humidity: 10%~90%RH, Non-condensing
2.2 Hardware Installation
Install SIM card
Open the card slot cover as shown, then slide the SIM card into the slot until you hear a clicking
sound.

Note:
1. SIM card not provided by TP-LINK.
2. Micro or Nano SIM cards should be converted using provided SIM card trays.
3. Before the SIM card inserted, please make sure that the M5360 is power off and not
charged.
Turn on the M5360
Hold the power button until the screen appears as shown below. (You can also hold the power
button to turn off the M5360).