TP-Link M5360 - Page 39

M5360
3G Mobile Wi-Fi, 5200mAh Power Bank User Guide
-32-
Figure 4-28 Restore to factory defaults
 Restore to Factory Defaults: Click Restore to reset all configuration settings to their
default values. All of the settings you have saved will be lost when the default settings are
restored.
You can restore the following factory default values:
 The default login Password: admin
 The default IP Address: 192.168.0.1
 The default Subnet Mask: 255.255.255.0
 The default SSID: TP-LINK_M5360_XXXXXX (XXXXXX is the last 6 characters of the
device’s MAC address). Please refer to the label on the rear cover of the device for the
default SSID.
 The default Wireless Password: Please refer to the label on the rear cover of the device for
the default wireless password.