TP-Link MC210CS - User Manual

© 2017 TP-Link 7106507859 REV4.0.0
Gigabit Ethernet Media Converter
Note: MC220L needs to be plugged in with an SFP module to work normally. It is recommended to use a TP-Link SFP module on MC220L, because other vendors’
SFP modules may be incompatible.
LC-SC Fiber Cable
Package Contents: Media Converter, Power Adapter, User Guide
Scenario 1: Connect Devices with and without Optical Interfaces
Ethernet device
with optical interfaces
Media Converter
1000Base-X interface
Ethernet device
without optical interfaces
1000Base-T interface
Twisted-Pair Cable
Note:
1. Either two MC200CMs or two MC210CSs can work cooperatively. Two MC220Ls with the same SFP module can work cooperatively.
2. The MC220L can also cooperate with an MC200CM or an MC210CS, however, the mode and wavelength of the SFP module used in MC220L must be the same
as the opposite end.
3. Connect the TX port of one converter to the RX port of the other using a ber cable.
Scenario 2: Connect Devices without Optical Interfaces
Fiber CableTwisted-Pair Cable Twisted-Pair Cable
Ethernet device
without optical interfaces
Media Converter Media Converter
Ethernet device
without optical interfaces
1000Base-T interface1000Base-T interface
Enlarge Your Ethernet Network
For technical support and other information, please visit
http://www.tp-link.com/support, or simply scan the QR code.
MC200CM/ MC210CS/ MC220L
Note: MC200CM is used as an example throughout this guide. Other models may dier in appearance.

TP-Link MC210CS Specifications

General

Fiber optic connector	SC
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Wavelength	1310 nm
Fiber mode structure	Single-mode
Maximum transfer distance	15000 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Internal	No
Certification	FCC, CE
Product color	Black
LED indicators	Activity, Power
Duplex system	Full
Auto MDI/MDI-X	Yes
Networking standards	IEEE 802.1ab, IEEE 802.3x, IEEE 802.3z
Cable types supported	Cat6
Ethernet interface type	Gigabit Ethernet
Maximum data transfer rate	1000 Mbit/s
Power consumption (max)	5.5 W
Sustainability certificates	RoHS
Package depth	204 mm
Package width	165 mm
Package height	65 mm
Package weight	430 g

Weight and Dimensions

Depth	73 mm
Width	94.5 mm
Height	27 mm

Summary

Connecting Devices with Optical Interfaces

Connecting Devices without Optical Interfaces

LED Indicators Explained

Power LED (PWR)

Indicates the power status of the device, showing if it is on or off.

Fiber Port LinkActivity LED (FX)

Shows link status and data transmission activity for the fiber optic port.

Twisted-Pair Port LinkActivity LED (TP)

Indicates link status and data activity for the twisted-pair Ethernet port.

Device Specifications

General Technical Specifications

Details supported standards, LED types, interface connectors, and cable requirements.

Environmental and Physical Characteristics

Outlines the operational and storage temperature and humidity ranges for the device.

Safety and Compliance Information

General Safety Precautions

Provides essential guidelines for safe operation, handling, and maintenance to prevent hazards.