TP-Link Omada MC220L - User Manual

To Next Page

SFP/SFP+ Media Converter

Note: It is recommended to use a TP-Link SFP/SFP+ module on MC220L/MC420L respectively, because other vendors’ modules may be incompatible.

Fiber Cable

Package Contents: Media Converter, Power Adapter, User Guide

Scenario 1: Connect Devices with and without Optical Interfaces

Ethernet device

with optical interfaces

Media Converter

10GBASE-SR interface

Ethernet device

without optical interfaces

Ethernet interface

Twisted-Pair Cable

Note:

1. Two converters with a pair of SFP/SFP+ modules can work cooperatively.

Scenario 2: Connect Devices without Optical Interfaces

Fiber Cable

Twisted-Pair Cable Twisted-Pair Cable

Ethernet device

without optical interfaces

Media Converter Media Converter

Ethernet device

without optical interfaces

Enlarge Your Ethernet Network

MC220L/ MC420L

Note: MC420L is used as an example throughout this guide. Other models may dier in appearance.

Ethernet interface

For technical support and other information, please visit

https://www.tp-link.com/support/?type=smb, or simply scan the QR code.

SFP/SFP+ Module

Need help?

Do you have a question about the TP-Link Omada MC220L and is the answer not in the manual?

TP-Link Omada MC220L Specifications

General

LED Indicators	PWR, Link/Act
Type	Media Converter
Ports	1 RJ45 port, 1 SFP port
Standards and Protocols	IEEE 802.3ab, IEEE 802.3z, IEEE 802.3u
Dimensions	94.5 x 73.0 x 27.0 mm
Wave Length	Depends on SFP module
Data Rates	10/100/1000 Mbps
Environment	Operating Temperature: 0°C to 40°C; Storage Temperature: -40°C to 70°C; Operating Humidity: 10% to 90% non-condensing; Storage Humidity: 5% to 90% non-condensing
Fiber Mode	Depends on SFP module
Weight	0.23 kg