TP-Link NC250 - Chapter 4 Configure Your Camera; 4.1 Log in to Your Camera

NC230 HD Day/Night Wi-Fi Cloud Camera
HD Day/Night Cloud Camera, 300Mbps Wi-FiNC25
0
9
Chapter 4 Configure Your Camera
You can use the tpCamera app and TP-LINK Cloud (www.tp-linkcloud.com) to view and manage
your camera remotely. To configure the camera’s settings, such as the network settings, cloud
settings, notification delivery, you should use the camera’s built-in web management page in your
local network.
4.1 Log in to Your Camera
1. Connect a computer to the router that your camera is connected to. You can use an Ethernet
cable or connect it to the router’s Wi-Fi network.
2. Find the management IP address of the camera from the web management page of the
router. Here we use the web management page of TP-LINK Archer D20 for demonstration.
3. On a computer that connects to the same router as the camera does, open a web browser,
type in the camera’s IP address in the address field, and press Enter. Here we use
http://192.168.0.106 for demonstration.
4. Enter the default username and password (admin/admin). Click Login.