Manage the Extended Network and Security Settings
Click Save to save the settings.
Relocate.
Plug in the extender halfway between your wireless router/AP (Host
Network) and the Wi-Fi dead zone.
Wait for the extender to reconnect and the LED turns solid blue. If
not, relocate it closer to the router to achieve a good (or better) signal
quality.
Enjoy!
The extender shares the same wireless network name (SSID) and wireless
password as your host network. If you want to change the wireless network
name (SSID), please refer to Customize the Extender’s SSID.
On the Extended Network page, you can change or hide the wireless network
name (SSID) of the extender, as well as enable or disable the wireless network
of the extender.
Launch a web browser and type in http://tplinkrepeater.net, then go to
Settings->Wireless-> Extended Network page.
Either keep the host SSIDs (default) or customize 2.4GHz and 5GHz
SSIDs using up to 32 characters.
When Host 2.4GHz/5GHz Security is WEP, please select
the index same with the host network.
To Next Page
Loading...
