Need help?Do you have a question about the TP-Link RE350 AC1200 and is the answer not in the manual?
General| Frequency Bands | 2.4 GHz, 5 GHz |
|---|---|
| Maximum Data Transfer Rate | 1200 Mbps |
| Antenna Type | External |
| Number of Antennas | 2 |
| Button | WPS Button, Reset Button |
| LED Signal Indicators | Yes |
| Operating Temperature | 0°C~40°C (32°F~104°F) |
| Operating Humidity | 10%~90% non-condensing |
| Storage Temperature | -40°C~70°C (-40°F~158°F) |
| Storage Humidity | 5%~90% non-condensing |
| Wi-Fi Standard | IEEE 802.11ac/n/g/b/a |
| Wireless Speed | 300 Mbps at 2.4 GHz, 867 Mbps at 5 GHz |
| Ethernet Ports | 1 x 10/100 Mbps |
| Power Consumption | 9W |
| Power Supply | 100-240V, 50/60Hz |
Details the extender's purpose, capabilities, and key features like 802.11ac support.
Describes the physical design, ports, buttons, and LED indicators.
Guides on optimal placement, environmental factors, and prerequisites for setup.
Covers WPS connection and the initial steps for web browser setup.
Detailed guide for setting up the extender using a web browser interface.
Explains how to use the extender as an Access Point or a wired device adapter.
How to view the current network connection status and indicators.
Information about connected devices and network details from the status page.
Steps to extend other networks and change wireless network names (SSIDs).
Covers changing admin credentials and configuring wireless security (WPA/WEP).
Manages device access and configures the extender's IP address and DHCP server.
Features for controlling LEDs, upgrading firmware, and setting time.
Procedures for backing up settings, restoring from backups, and resetting to defaults.
Managing system logs, rebooting the device, and safely logging out of the interface.
Solutions for forgotten passwords, web access problems, and MAC filter conflicts.
Details the hardware and software specifications, standards, and ports.
Definitions of technical terms used in the manual.
To Next Page
