Manage the Extender
● Restore Configurations
Click Browse to locate and select your backup file. Click Restore and
then YES to restore the extender. The restore process may take a few
minutes to complete and the extender will automatically reboot itself when
finished.
Launch a web browser and type in http://tplinkrepeater.net, then go to
Settings->System Tools-> Backup & Restore webpage.
Click Factory Restore to reset your extender to its factory default settings
in the figure below.
Launch a web browser and type in http://tplinkrepeater.net，then go to
Settings->System Tools-> System Log webpage.
You can select the Log Type and Log Level in the Log Filter drop-down list.
Here you can quickly trace the logs which you want to view.
Factory Restore will erase all settings that you have configured
for the extender. To re-login to the extender's management
page, use the default admin for both username and password.
To Next Page
Loading...
