English
7
A3. Verify that http://tplinkrepeater.net is correctly entered
in the web browser and press Enter.
Q2. What should I do when I cannot connect the
extender via WPS?
A. Some dual-band routers may be trouble connecting
to the extender via WPS. If you experience connection
issues, we recommend that you use the extender's
web-based interface.
Q3. What should I do if the
LED does not change to
solid after completing Option ONE?
A1. You may have entered the incorrect Wi-Fi password of
your host network during the configuration. Please log
into the extender's web-based interface to check the
password and try again.
A2. Please reset the extender and go through the
configuration again.
Q4. How do I restore the extender to its factory default
settings?
A. While the extender is powered on, press and hold the
Reset button until all the LEDs turn on momentarily.
To Next Page
Loading...
