Need help?Do you have a question about the TP-Link RE600X and is the answer not in the manual?
General| Type | Network transmitter & receiver |
|---|---|
| WPS push button | Yes |
| Browser supported | Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0 |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum transfer distance | - m |
| Windows operating systems supported | Windows 10, Windows 2000, Windows 7, Windows 8, Windows 8.1, Windows 98SE, Windows NT, Windows Vista, Windows XP |
| Product color | White |
| Quantity per pack | 1 pc(s) |
| Antenna type | Internal |
| Antennas quantity | 2 |
| Transmitting power (CE) | 2.4 GHz ≤20dBm, 5 GHz ≤30dBm dBm |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax) |
| Cabling technology | 10/100/1000Base-T(X) |
| Security algorithms | WEP, WPA, WPA2, WPA3 |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Wi-Fi data rate (max) | 1200 Mbit/s |
| Sustainability certificates | CE, Federal Communications Commission (FCC), RoHS |
| Ethernet LAN (RJ-45) ports | 1 |
| Harmonized System (HS) code | 85176990 |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50/60 Hz |
| Power consumption (max) | 10 W |
| Package type | Box |
| Package depth | 125 mm |
| Package width | 202 mm |
| Package height | 97 mm |
| Package weight | 370 g |
Weight and Dimensions| Depth | 36 mm |
|---|---|
| Width | 78 mm |
| Height | 149 mm |
Details the extender's purpose, installation, and management features.
Illustrates the physical layout and components of the range extender.
Explains the status indicators of the extender's LEDs in different modes.
Details the function of each button on the extender, like WPS and Reset.
Instructions on plugging in the extender and waiting for the power LED to turn on.
Details three methods for configuring the extender: Tether App, Web Browser, WPS.
Explains the unified Wi-Fi network created by TP-Link OneMesh routers and extenders.
Steps to set up a OneMesh network, ensuring router compatibility.
Guidance on leaving/joining, changing wireless settings, and managing devices in OneMesh.
Instructions for creating a TP-Link ID for cloud service and device management.
Steps to modify the email address and password associated with your TP-Link ID.
Details on adding, removing, and managing user TP-Link IDs and their permissions.
Guide on using the Tether app for managing the extender and its features.
Steps to extend another host network or change extended network settings.
Modify the extender's LAN IP address, subnet mask, and gateway settings.
Permit or block specific devices from accessing the internet via blacklist/whitelist.
Enables one high-performance band for streaming and gaming, disabling the other.
Instructions on configuring the extender to operate in Access Point mode.
Methods to connect devices manually or via WPS to the extender.
Explains the LED indicators when the extender is in Access Point mode.
Configure the extender's system time and daylight saving time settings.
Instructions for upgrading the extender's firmware online or locally.
Save extender configuration, restore from backup, or reset to factory defaults.
Procedure to change the login username and password for the web management page.
To Next Page
