TP-Link T1600G-52TS - Ip Igmp Profile; Deny

244
27.20 ip igmp profile
Description
The ip igmp profile command is used to create the configuration profile. To
delete the corresponding profile, please use no ip igmp profile command.
Syntax
ip igmp profile id
no ip igmp profile id
Parameter
id —— Specify the id of the configuration profile, ranging from 1 to 999.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Create the profile 1:
T1600G-52TS(config)# ip igmp profile 1
27.21 deny
Description
The deny command is used to configure the filtering mode of profile as deny.
Syntax
deny
Command Mode
Profile Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.