3
Appearance
The Home Security Wi-Fi Camera has a system LED that changes color according to its status, a alert light, lens, microphone, DC power port, RESET
button and a microSD card slot. Refer below for details.
microSD Card Slot
Insert a microSD card and initialize it on the
app for local recording.
System LED
• Solid red:
Starting up
• Blinking red and green:
Ready for setup
• Blinking green slowly:
Connecting to Wi-Fi
• Solid green:
Connected to Wi-Fi
• Blinking red:
Camera resetting
• Blinking green quickly:
Camera updating
RESET Button
Press and hold for at least 5 seconds until
the LED blinks red to reset your camera.
Alert Light
Blinks to alert you the events when
motion detected.
DC Power Port
Connect the power cord provided.
Lens
Microphone
Built-in internal microphone.
Note:
Do NOT insert objects into the hole.
To Next Page
Loading...
