24
Night Vision Mode
Unlike standard cameras’ black and white night view, Tapo C320WS is equipped with a high-resolution sensor and spotlight, helping enhance your
security view with vivid colors even at night. You can choose a preferred night mode and adjust the white light brightness as needed.
1. Select Night Mode
Go to Camera Settings > Night Mode Settings, and select your preferred night mode.
Infrared Mode
Only use the infrared light to create black-and-white images at night.
Full Color Mode
Only use the white light to see things vividly in full color at night. The white light will be on.
Smart Mode
Typically run on Infrared Mode and switch automatically to Full Color Mode when motion is detected.
The white light will be on in Full Color Mode.
To Next Page
Loading...
