TP-Link Tapo C320WS2K - Mount Your Camera

12
Mount Your Camera
When you nish adding your camera in the Tapo app, you can place your camera on a at surface, or mount it on a wall or ceiling with the provided
mounting template and screws.
Follow the steps below to mount your new camera, or follow the setup video at https://www.tp-link.com/support/setup-video/.
Step 1. Drill Holes
Stick the mounting template to the desired mounting place. Drill 3 screw holes according to the template.
Step 2. Mount Camera
Insert three anchors into the holes and use the screws to ax the camera over the anchors.
0° to 70°
0° to 360°