5
Before You Start
If you want hardwire the doorbell into your home circuit:
WARNING: Risk of Electric Shocks
• Your existing doorbell must be wired (not battery powered) and supplied by an 8-24V AC, 10VA Minimum transformer.
• Ensure that your existing doorbell works by ringing the doorbell.
• Locate your existing doorbell chime.
• Make sure the doorbell is in an area with a strong Wi-Fi signal.
• Disconnect power at the fuse or circuit breaker before installing.
• You can always nd detailed wiring and installation instructions in the Tapo app.
OR
To Next Page
