13
Option 3: Pole Mount
3. Power Up the Camera
Connect the camera to a power
outlet using the provided power
adapter. Install the waterproof
seal for the power connectors.
Male Power Connector Waterproof Seal
Female Power Connector
Mount the camera on the pole
using two pole-mounting loops*
(loop width ≤ 12mm).
2. Mount the Camera
*Pole-mounting loops are not included.
Pole-mounting loops
Route the camera power cord
through the opening of the
bracket. Use two bracket screws
to ax the bracket and the
camera.
1. Ax the Camera and Bracket
To Next Page
Loading...
