3
Appearance
2
1
3
4
7 8
6
5
microSD
Loosen the screws. While the camera is powered on,
use a pin to press and hold the RESET button for at
least 5 seconds until the System LED blinks red.
Loosen the screws and insert a microSD card*.
Initialize it on the Tapo app for local recording.
*microSD card not included.
Used to connect to a
12V DC power adapter
2
3
Lens
4
System LED
Microphone
1
IR LEDs
7
Speaker
8
DC Power Connector
5
Reset
6
microSD Card Slot
To Next Page
