TP-Link Tapo TC82 - User Manual

To Next Page

Tapo Solar Panel

Quick Start Guide

01 /

Position the Solar Panel

The solar panel captures free, clean solar energy and provides non-stop

power supply for your Tapo cameras. The position and tilt angle of the

solar panel greatly aects the solar eciency.

1. Choose a location where the solar panel gets the most sunlight

throughout the year.

2. Position the panel south-facing in the Northern Hemisphere or

north-facing in the Southern Hemisphere. The recommended tilt angle

between the panel and the horizontal ground is 35° ~ 45°.

3. Regularly wipe the panel to remove dust and debris.

1. Drill Holes

Stick the mounting template to a solid and

level wall surface. Drill three screw holes

according to the template.

2. Mount Bracket

Insert three wall anchors into the

holes and use the mounting screws to

ax the solar panel bracket over the

anchors.

3. Install Solar Panel

Slide the solar panel onto the

mounting bracket until it clicks

into place.

4. Install Solar Panel

Slide the solar panel onto the mounting

bracket until it clicks into place.

1. Drill Holes

Stick the mounting template to a solid and

level wall surface. Drill three screw holes

according to the template.

Scenario 2. Mount Solar Panel & Extra Camera

5. Install Screw Caps & Base Cover

Insert two screw caps into the screw holes

until ush, then install the base cover.

4. Adjust Angle

Loosen the adjustable screw, tilt

the solar panel to adjust the

angle, and then tighten the

adjustable screw.

The recommended tilt angle between

the panel and the horizontal ground is

35° ~ 45°.

5. Adjust Solar Panel Angle

Loosen the adjustable screw, tilt the solar

panel to adjust the angle, and then tighten

the adjustable screw.

The recommended tilt angle between the panel

and the horizontal ground is 35° ~ 45°.

6. Install Camera & Adjust Angle

Install the camera onto the bracket and adjust

the camera angle as per the camera's guide.

Scenario 1. Mount Solar Panel Only

Φ=6 mm (15/64 in.)

40°

Φ=6 mm (15/64 in.)

40°

2. Install Camera Bracket

Secure the camera bracket to the solar

panel bracket using two screws.

The third hole below is for securing the

solar panel bracket.

02 /

Mounting

*Images may dier from actual products.

Back Side

Ensure the camera is securely

attached to the camera bracket

by tightening the bottom screw.

Camera-suggested

Angle

Wall Anchors ×3 + Self-tapping Screws ×3 Screw Caps ×2

Camera Bracket Screws ×2

Wall Anchors ×3 + Self-tapping Screws ×3

Screw Caps ×2

3. Mount Solar Panel Bracket

Insert three wall anchors into the

holes and use the mounting screws to

ax the solar panel bracket over the

anchors. Then, insert two screw caps

into the upper screw holes until ush.

(√)

(×)

Screw Cap

Orientation

(√)

(×)

Screw Cap

Orientation

Back Side

Need help?

Do you have a question about the TP-Link Tapo TC82 and is the answer not in the manual?

This document describes the Tapo Solar Panel, a device designed to provide continuous power to Tapo cameras using solar energy.

Function Description

The Tapo Solar Panel captures free, clean solar energy to provide non-stop power supply for Tapo cameras. Its primary function is to convert sunlight into electrical energy to keep compatible cameras charged and operational. The manual outlines three scenarios for mounting the solar panel:

Mount Solar Panel Only: For installations where only the solar panel needs to be mounted.
Mount Solar Panel & Extra Camera: For installations where the solar panel and an additional camera are mounted together.
Mount Solar Panel and Camera KIT: For installations where the solar panel and a camera kit are mounted.

The device is designed to optimize solar energy capture through proper positioning and tilt angle, which significantly affects its efficiency.

Important Technical Specifications

Drill Hole Diameter: For mounting, screw holes should be drilled to a diameter of 6 mm (15/64 in.).
Mounting Hardware: Includes 3 wall anchors, 3 self-tapping screws, and 2 screw caps for mounting the solar panel bracket. For scenarios involving cameras, additional camera bracket screws may be included.
Recommended Tilt Angle: The optimal tilt angle between the solar panel and the horizontal ground is 35° ~ 45°.
Cable Connection: Utilizes a connector with a black ring for connecting to the camera's charging port. Waterproof gaskets are provided to protect connections from moisture and dust.
Compatibility: Designed for Tapo cameras. For cameras with a Micro USB charging port, a USB adapter and appropriate Micro USB waterproof gasket are required.
Extension Cable: An extension cable is provided for situations where the power cable is too short.
Cable Management: A cable zip tie is included for bundling excess cable when the power cable is too long.

Usage Features

Optimal Positioning: Users are instructed to choose a location where the solar panel receives the most sunlight throughout the year.
Directional Orientation: The panel should be positioned south-facing in the Northern Hemisphere or north-facing in the Southern Hemisphere for maximum efficiency.
Adjustable Angle: The solar panel bracket features an adjustable screw, allowing users to tilt the panel to the recommended 35° ~ 45° angle for optimal solar energy capture.
Secure Mounting: The mounting process involves affixing a bracket to a solid wall surface using anchors and screws, then sliding the solar panel onto the bracket until it clicks into place.
Camera Integration: In scenarios involving cameras, the camera bracket is secured to the solar panel bracket, and the camera is then installed and its angle adjusted as per its guide. The camera must be securely attached by tightening a bottom screw.
Waterproof Connection: The connection between the solar panel and the camera uses a waterproof gasket to protect against environmental elements, ensuring durability and reliable operation.
Cable Length Management: The system provides solutions for both short and long power cables. An extension cable can be used for added reach, while a zip tie helps manage excess cable to maintain a tidy installation.

Maintenance Features

Regular Cleaning: Users are advised to regularly wipe the panel to remove dust and debris. This is crucial for maintaining the solar panel's efficiency, as accumulated dirt can reduce its ability to capture sunlight.
Durable Design: The use of waterproof gaskets at connection points helps protect the internal components from moisture and dust, contributing to the device's longevity and reducing the need for frequent repairs.
Safety Guidelines: The manual includes safety information, advising users to keep the device away from fire and hot environments, not to immerse it in liquids, and not to attempt to disassemble, repair, or modify the device. For service, users are directed to contact TP-Link. These guidelines help prevent damage and ensure safe operation.