Quick Installation Guide
Portable 3G/4G Wireless N Router
MODEL NO. TL-MR3020
Package Contents
TL-MR3020 QIG
Power Adapter
Resource CD Ethernet Cable
Portable 3G/4G Wireless N Router
TL-MR3020
System Requirement
The following operating systems are supported:
The following browsers are supported:
• Windows XP • Windows Vista • Windows 7
• Windows 98 • Windows 2000 • Windows 2003
• Windows Me • Mac • Linux
• Internet Explorer • FireFox
• Safari • Chrome
Physical Description
1
Hardware Connection
2
In this mode, the TL-MR3020 is connected to a wired network
and transforms the wired Internet access into wireless so that
multiple users can share the Internet.
In this mode, the TL-MR3020 is wirelessly connected to the WISP
(Wireless Internet Service Provider) and share the Internet with
multiple users.
In this mode, the TL-MR3020 is connected to a 3G/4G USB modem
and wirelessly share the 3G/4G mobile connection to multiple users.
RJ45 Ethernet Port
Mini USB Port
3G/4G USB Port
Mode Switch
150Mbps TL-MR3020
WPS/RESET
G
3 /4G
PSIW
PA
WAN/LAN
POWER
3G/4G USB
WPS/RESET
150Mbps TL-MR3020
Power
WPS/RESET
Internet
RJ45 Ethernet
WLAN
3G/4G USB Port
Mini USB Port
RJ45 Ethernet Port
Mode Switch
Power
WLAN
RJ45 Ethernet
Internet
WPS/RESET
This port is used to plug a 3G/4G modem/card into.
This port is used to connect the provided power adapter.
This port can be LAN or WAN port depending on the
working mode.
This button is used to switch the working mode of the
Router.
3G/4G
Wired Network
The Ethernet port is connected, but there is
no data being transferred.
The Ethernet port is transferring data.
The Ethernet port is not connected.
Wi-Fi is enabled.
There is data being transferred through
Wi-Fi.
Wi-Fi is disabled.
To use WPS function, please push the button for less
than 5 seconds, and then the WPS LED will flash; to
reset the Router, please push the button for at least 10
seconds.
The Router is connected to the Internet, but
there is no data being transferred.
The Router is transferring data.
The Router is not connected to the Internet.
Solid
O
Flashing
O
Solid
O
Flashing
O
The Router is on.
The Router is o.
3G/4G Router Mode (Default)
WISP Client Router Mode
Standard AP Mode
7106503718
USB Cable
SSID: 123
Mode Switch
Mode Switch
Mode Switch
1. TL-MR3020 can be powered by Power Adapter or laptop/PC through the USB cable.
2. TL-MR3020 will restart automatically after you turn the Mode Switch.
NOTE:
Connect to Network
3
For Windows 7
For Windows XP
1. The default SSID of the network is TP-LINK_POCKET_3020_xxxxxx
．
(The xxxxxx is the last six characters of the Router’s MAC address.)
NOTE:
2. The pre-encryption of TL-MR3020 is written on the product label, please refer to it when you connect to the wireless network.
Router Congurations
4
Open a web browser, type 192.168.0.254 in the address eld, and press Enter. At the prompt,
enter the default User Name and Password: admin. Click OK to enter the Router’s management
page.
After a successful login, please congure the Router according to the working mode you
choose.
For your convenience, TL-MR3020 will keep the following two items when you switch the working mode:
1. WAN information (Internet information), such as the User name and Password of 3G/4G ISP and PPPoE, the Dynamic IP address setting, etc.
2. Wireless settings, such as SSID (Wireless Network Name), Key Type and Password.
NOTE:
Click the icon at the bottom of your desktop.
1
Click the icon at the bottom of your desktop.
1
Click Refresh network list, and then select the SSID
(wireless network name) of TL-MR3020. Click Connect.
2
Click refresh button and then select the target network. Click
Connect.
2
Here we take Wireless Network Connection as example, please make sure your device is wirelessly enabled.
1
2
Make sure the status of Airport is On, and then select the
SSID (network name) of TL-MR3020 and click it.
Click the icon at the right top of your desktop.
For MAC OS
1
2
(To be continued)
Solid
Flashing
Solid
To Next Page
Need help?
General
Weight and Dimensions
