Configure the Client Mode on the TL-MR3020
The TL-MR3020 can be connected to another device via Ethernet cable and acts as a
wireless adaptor to send/receive the wireless signal from your wireless network.
Application: For a laptop, PC, Network Video recorder(NVR), Smart TV, Media Player, or
game console with an Ethernet port. Use the TL-MR3020 to make your devices Wi-Fi
enabled, granting them access to your wireless network.
Application Example - NVR connection
Figure 1
Step 1 - Connect the LAN port of the TL-MR3020 to a PC or laptop and power up.
Step 2 - Change the IP address of the PC or laptop to 192.168.1.100 (or other IP address
other than 192.168.1.1) and subnet mask to 255.255.255.0
To Next Page
