Connect the Hardware
Verify the Hardware
Connection
Enjoy the Internet
Note:
If the Internet LED is o or orange, please refer to FAQ > Q5.
If the 2.4GHz LED and 5GHz LED are o, press and hold
the Wi-Fi button on the rear panel for about 2 seconds and both
the LEDs should turn solid on in a few seconds.
Internet
Green
USB
On
Power
On
5GHz
On
2.4GHz
On
3G/4G Router Mode
Wired: Connect your computers to the router's Ethernet ports via Ethernet cables.
Wireless: Connect wireless devices using the SSID (network name) and wireless
password printed on the label at the bottom of the router.
Wireless TL-MR3620 Wired
Wait about 2 minutes and then conrm that the following
LEDs are solid on. If the Internet LED is green, your
router is connected to the internet successfully.
Quick Installation Guide
T L- M R 3 62 0
AC1350 3G/4G Wireless Dual Band Router
2 Plug in a 3G/4G USB modem
with a SIM/UIM card.
1 Connect the power adapter to
the router and turn on the router.
Power Adapter
Router
3G/4G
USB Modem
To Next Page
Need help?
General
