02
English
Customize the 4G LTE Router
1 Make sure your computer is connected to the router (via wired or wireless).
2 Enter http://tplinkmodem.net or 192.168.1.1 in the address bar of a web browser. Based
on the actual web management login page: use the default admin for both username and
password or create a new password to log in.
3 Follow the step-by-step instructions on the Quick Setup page to complete the initial
configuration.
Note: The router can also be used (or configured) in wireless router mode for ADSL/Cable connections. For more information,
please refer to the User Guide at www.tp-link.com.
FAQ(Frequently Asked Questions)
Q1. What can I do if the login page does not appear?
• Verify that the computer is set to obtain an IP address automatically from the router.
• Verify that http://tplinkmodem.net or 192.168.1.1 is correctly entered in the web browser.
• Use another web browser and try again.
• Reboot your router and try again.
• Disable and then enable the active network adapter and try again.
Q2. What can I do if I cannot access the internet?
To Next Page
Loading...
