Quick Installation Guide
300Mbps Wireless N 4G LTE Router
Connect the Hardware
Verify the Hardware
Connection
Enjoy the Internet
TL-MR6400
For better Internet connection, make sure 3 to 4 bars of the
Signal Strength LED are lit. Otherwise, relocate the router
to a location that receives a strong mobile Internet signal, such as
near a window.
Wired: Connect your computers to the router's LAN ports via Ethernet cables.
Wireless: Connect using the SSID (wireless network name) and Wireless Password
printed on the product label at the bottom of the router.
1 Install the 4G LTE antennas and
position them upwards.
3 Turn on the router. 2 Insert the SIM card into the slot until
you hear a click.
Note: Micro or Nano-SIM card must be converted using a
standard SIM card adapter provided by TP-LINK.
Wireless TL-MR6400 Wired
Verify the hardware connection by checking the
following LEDs’ status. If the Internet LED is
on, your router is connected to the Internet
successfully.
Power
On
On
Internet
On
Wireless