TP-Link TL-PS110U Installation Manual

1
The product model shown in this QIG is TL-PS110U, as an example.
Before you start, you should prepare the following items
¾ Windows 2000/XP/2003/Vista/7 computer with print server setup CD
¾ One Printer
¾ One Printer cable
¾ One Router
Hardware Installation
1. Turn off the printer’s power.
2. Connect the print server to
your printer with the supplied
printer cable. Connect the
print server to your Router
with the RJ45 cable. The
image beside is the classic
infrastructure topology for
reference:
3. Turn the printer’s power on.
4. Plug the AC power adapter into the power connector on the print server.
5. Wait 40 seconds as part of the print server’s Power On Self Test (POST).
Factory Default Settings
¾ Username: admin
¾ IP Address: 192.168.0.10
¾ Subnet Mask: 255.255.255.0
The TL-PS110U is produced without password by default.
Note
Note

TP-Link TL-PS110U Specifications

General

Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Network connection type	Ethernet LAN
Interface	USB 2.0
Network ready	Yes
Power requirements	5V DC, 2A
Compatible operating systems	Windows 9x/ME, Windows NT/2000/XP/Vista, Mac OS 8.1 or Later, UNIX/Linux, Netware 3.12 or Later
Non-operating relative humidity (non-condensing)	0 - 80 %
USB 2.0 ports quantity	1
Storage temperature (T-T)	-5 - 65 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 70 %
Certification	FCC, CE
Supported network protocols	TCP/IP, IPX/SPX, NetBEUI, Apple Talk, LPR, IPP/SMB, RAW, TCP
Internal	No
Product color	White
Package type	Box
Package depth	168 mm
Package width	207 mm
Package height	68 mm
Package weight	280 g
Quantity per pack	1 pc(s)
Windows operating systems supported	Windows 10, Windows 2000, Windows 7, Windows 8, Windows 8.1, Windows ME, Windows NT, Windows Vista, Windows XP

Weight and Dimensions

Depth	65 mm
Width	73 mm
Height	30 mm