3
Select the print server,
right-click on it and select
Server Configurations
In this screen, you will see the product listed as MFP and Storage Server
-XXXXXX (192.168.0.10). If your computer is not in the 192.168.0.x network
segment, it’ll tell you that the TL-PS310U is in different network segment. In this
situation, you need to change the IP of the TL-PS310U.
On your desktop you will see a
new icon, double-click the icon
and it will bring up the MFP and
Storage Server setup utility.
To Next Page
Loading...
