TP-Link TL-R600VPN Installation Guide

Installation Guide
TL-R600VPN
Gigabit Broadband VPN Router
LED Explanation
On: Power on
O: Power o
PWR
PWR
On (Yellow): An inactive 10/100Mbps
device is linked to it
On (Green):
An inactive 1000Mbps
device is linked to it
Flashing (Yellow): Transmitting/receiving
data at 10/100Mbps
Flashing (Green): Transmitting/receiving
data at 1000Mbps
WAN/LAN
WAN
4
3
2
1
Package List
TL-R600VPN
Connection
Connect the WAN port of the
router to the cable or the DSL
modem with an Ethernet cable.
Connect the AC power socket
on the router to an electrical
outlet with the power cord
provided.
Connect the LAN port of the
router to the computer with
an Ethernet cable.
1
Modem
Conguration
2. After a successful login, the Quick Setup screen will appear. If the
prompt does not appear, click Quick Setup on the left of the main menu,
then click Next.
1. Enter http://192.168.0.1 in the address bar of a web browser. Use
admin for both User Name and Password, and click Login.
Installation Guide
Resource CD
Power Cord
Ethernet Cable
PC
Internet
TL-R600VPN
Flashing: System running normally
On/O: System running abnormally
SYS
SYS
2
3
7106507233 REV3.0.1

TP-Link TL-R600VPN Specifications

General

VPN Support	Yes
Firewall	SPI Firewall
Network Standards	IEEE 802.3, 802.3u, 802.3ab
Button	Reset button
Flash	8MB
DRAM	64MB
Device Type	VPN Router
WAN Ports	1 x 10/100/1000Mbps
LAN Ports	4
Management	Web-based GUI, SNMP v1/2c
Standards and Protocols	TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP
Network Media	10BASE-T: UTP category 3, 4, 5 cable (maximum 100m), EIA/TIA-568 100Ω STP (maximum 100m)
DHCP	DHCP Server, DHCP Client
Dynamic DNS	DynDns, NO-IP
Security	DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter, IP and MAC Address Binding