EasyManuals Logo

TP-Link TL-R600VPN Quick Installation Guide

TP-Link TL-R600VPN
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Physical Description
1
Quick Installation Guide
MODEL NO. TL-R600VPN
Package Contents
QIG
MODEL NO. TL-R600VPN
Resource CD
Ethernet Cable
TL-R600VPN
Hardware Connection
2
Connect the WAN port of the router to the cable or DSL
modem via Ethernet cable.
• Front Panel
• Back Panel
• LED Descriptions
SYS
PWR
Name
Status
WAN, LAN
Indication
On (Green)
The router is powered o
On/O
Flashing (Green)
The router has a hardware error
The router works properly
PC Conguration
3
Internet Protocol Select “Internet Protocol (TCP/IP)
”/“
Version 4 (TCP/IPv4)” and click “ Properties
”.
2
2
3
3
Select “Obtain an IP address automatically ” and “Obtain
server address automatically ”. Then click “OK”.
For Windows XP/2000 For Windows 7/Vista
For Windows XP/2000 For Windows 7/Vista
Click “Start Control Panel
For Windows XP/2000:
1
1
Network
and Internet Connections Network Connections”, and
.
Click “StartFor Windows Vista/7: Control Panel
Connect one end of the AC power cord to the AC power socket
on the router, and the other end into an electrical outlet. The
router will work automatically and the LED will display as the
LED Descriptions shown.
Connect a LAN port of the router to the computer by
Ethernet cable.
The router is powered on
O
View
network status and tasks”.
For Windows Vista For Windows 7
Click
View Status
Click
Local Area Connection
then find
Local Area Connection
icon and right click it. Then
Power Cord
Here we take the ADSL modem
Internet
12
3
click “Properties”.
The provided power cord may differ from the figure above
due to local power specifications.
On
(Green/Yellow)
There is a device linked to the corresponding port but not active (Green light indicates
the linked device is running at 1000Mbps, and yellow indicates the linked device is
running at 10/100Mbps.)
Flashing
(Green/Yellow)
The corresponding port is transmitting or receiving data (Green light indicates the
linked device is running at 1000Mbps, and yellow indicates the linked device is running
at 10/100Mbps.)
There is no device linked to the corresponding portO
For Windows XP/2000
DNS
TL-R600VPN
TD-8816
TP-LINK as an example.from
For Windows Vista/7, click “Properties” on the Pop-up after the
steps above.
Gigabit Broadband VPN Router
Gigabit Broadband VPN Router
7106504437 REV2.0.0

Other manuals for TP-Link TL-R600VPN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-R600VPN and is the answer not in the manual?

TP-Link TL-R600VPN Specifications

General IconGeneral
VPN SupportYes
FirewallSPI Firewall
Network StandardsIEEE 802.3, 802.3u, 802.3ab
ButtonReset button
Flash8MB
DRAM64MB
Device TypeVPN Router
WAN Ports1 x 10/100/1000Mbps
LAN Ports4
ManagementWeb-based GUI, SNMP v1/2c
Standards and ProtocolsTCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP
Network Media10BASE-T: UTP category 3, 4, 5 cable (maximum 100m), EIA/TIA-568 100Ω STP (maximum 100m)
DHCPDHCP Server, DHCP Client
Dynamic DNSDynDns, NO-IP
SecurityDoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter, IP and MAC Address Binding

Related product manuals