Once the XSCE is up and running, and you’ve made sure clients can connect and everything’s
working OK, log into the router’s web interface.
From the XSCE or from a client connected to the XSCE, you can go to http://172.18.126.100 (or
whatever IP address you set it to) to log in. Set up wifi encryption (if desired) and change the
router login credentials (highly recommended).
You may be wondering why we bothered to turn off wifi encryption to begin with. It’s to
eliminate the possibility of a wifi encryption issue in case a client can’t get an IP from the
XSCE’s DHCP server. We need to make absolutely sure the router/AP isn’t the source of an
issue. Once we’ve determined everything is working, then we can enable wifi encryption if
desired.
To Previous Page
Loading...
