TP-Link TL-WDR3600 - Regulatory and Safety Information

Sharedband Router Setup Steps
1) Remove the Sharedband routers from their packaging (DO NOT remove the protecve lm
from the routers for the rst 30 days) and place them in a suitable locaon
2) Use the included short Ethernet cable(s) to connect the routers’ yellow ’LAN’ ports in
either of these two conguraons:
a) The recommended setup is to connect the Sharedband routers together via an
un-managed switch
b) However you can connect the Sharedband routers together with an Ethernet cable (daisy
chained)
3) Use the included long Ethernet cables to connect each routers’ blue ‘Internet’ port to the
modems/routers provided by your ISP
4) Use the included power adapters to connect each router’s ’Power’ socket to a mains
power outlet
5) Ensure that the ‘On/O’ buon is depressed on all routers
TP-Link TL-WDR3600 2 www.sharedband.com