TL-WN322G 54M Wireless USB Adapter User Guide
Figure 1-2 Infrastructure mode.
Chapter 2 Installation Guide
2.1 Before You Begin
Before installing the new drivers of your TL-WN322G 54M Wireless USB Adapter, you
need to disable all of the Wireless LAN drivers that you have installed.
During the installation, Windows 98/ME/2000/XP/2003/64bit XP/ Vista may need to copy
systems files from its installation CD. Therefore, you may need a copy of the Windows
installation CD at hand before installing the drivers.
2.2 Installation for Windows 2000
Follow the steps below in order to install the TL-WN322G 54M Wireless USB Adapter
drivers:
1. Insert the Resource CD into your CD-ROM drive, Click the Start button and choose
Run. In the field that appears, enter F:\XXX\Win98_Me_2K_XP_X64\Setup.exe (if "F"
is the letter of your CD-ROM drive; XXX represents the setup program path, which is
labeled on the Resource CD).
Once the setup begins you will see the
Install Shield Wizard
, as the image depicts below.
- -
3
To Next Page
Loading...
