TL-WN322G 54M Wireless USB Adapter User Guide
Chapter 5 Examples for application
5.1 Example one: Configuration of WEP Encryption
Suppose you have an installed and using AP, the SSID is TEST and it adopts 64 bit WEP
encryption with the key “1111111111”.
To establish a connection with this AP, you should follow five steps below:
Step One: Double click “TEST” in available network taskbar to connect this network.
Step 1 : Double
click ”TEST” to
connect this network.
Figure 5-1
Step Two: Click "No” to continue.
Step 2:Click ”No”
to continue.
Figure 5-2
- -
28