TL-WN422G High-Gain Wireless USB Adapter User Guide
22
Figure 3-9
3.2.6 Scan Available Networks
ks window will appear below.
and click Activate to connect to an available network. If no
e configuration profile
for that network.
1. Click Scan on the Profile Management screen (shown in Figure 3-2), the Available
Infrastructure and Ad Hoc Networ
2. Click Refresh to refresh the list at any time.
3. Highlight a network name
configuration profile exists for that network, the Profile Management window will open the
General tab screen. Fill in the Profile name and click OK to create th
Figure 3-10
The auto selection feature allows the adapter to automatically select a profile from the list of
Profiles list, please follow these steps.
3.2.7 Auto Profile Selection Management
profiles and use it to connect to the network. To add a new profile into the Auto Selected
To Next Page
Loading...
