TL-WN422G High-Gain Wireless USB Adapter User Guide
29
Chapter 5. Example for Application
5.1 Configuration of PSP XLink Online game
Please ensure the software and hardware environments are well established before configuring.
For hardware, at least a PC, a TL-WN422G High-Gain Wireless USB Adapter and a PSP
device are needed. For software, the TL-WN422G Adapter driver should be properly installed.
Please operate as follows:
1. Connect the website of X-LINK http://www.teamxlink.co.uk
to register, and download the latest
software of X-LINK Kai.
2. Install the X-LINK Kai software, click Start > All Programs > XLink Kai > Configure Kai,
then set as Figure 5-1.
Figure 5-1
3. After completing the settings, please click Start > All Programs > XLink Kai > Start Kai to
connect to XLink Kai.
4. Open the wireless mode of the PSP device, then start an internet game.
5. Click Start > Control Panel > Network.
To Next Page
Loading...
