TP-Link TL-WN781ND - 3.2 To connect using WPS

TL-WN781ND 150Mbps Wireless N PCI Express Adapter User Guide
14
Figure 3-8
3.2 To connect using WPS
WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing
network quickly.
If your wireless Router supports WPS or QSS (Quick Security Setup), you can establish a
wireless connection between wireless card and Router using either Push Button Configuration
(PBC) method or PIN method. Three WPS connection methods are listed in the following parts,
while the third method is only supported in Windows XP and Windows Vista.
3.2.1 PBC (Push Button Configuration) method
1. Press the WPS/RESET button on the Router. Here takes Router TL-WR841ND for
example.
2. Open TWCU and click WPS tab. Select Push the button on my access point or wireless
router and then click Connect.