TL-WN821N Wireless N USB Adapter
25
Figure 4-2
2) Open the Router’s Web-based Utility and click QSS link on the left of the main menu.
Then Figure 4-3 will appear. Click Add device, then you can see Figure 4-4. Select
Press the button of the new device in two minutes and click Connect.
Figure 4-3
Figure 4-4
2. Secondly, press the QSS button of the adapter. There are two ways:
1) Press and hold the QSS button of the adapter directly for 2 or 3 seconds.
Figure 4-5
2) Double click the icon
on the desktop to open the QSS Utility and then you can see
the welcome screen shown as Figure 4-6. Click Next to cont
inue. Then select Push
the button on my access point in the next screen shown in Figure 4-7 and click Next.
To Next Page
Loading...
