TL-WN821N Wireless N USB Adapter
30
Chapter 5. Example for Application
5.1 Configuration of PSP XLink Online game
Please ensure the software and hardware environments are well established before configuring.
For hardware, at least a PC, a TL-WN821N Wireless N USB Adapter and a PSP device are
needed. For software, the TL-WN821N Adapter driver should be properly installed.
Please operate as follows:
1. Connect the website of X-LINK http://www.teamxlink.co.uk
to register, and download the
latest software of X-LINK Kai.
2. Install the X-LINK Kai software, click Start > Program > XLink Kai > Configure Kai,
then set as Figure 5-1.
Figure 5-1
3. After completing the settings, please click Start > Program > XLink Kai > Start Kai to
connect to XLink Kai.
4. Open the wireless mode of the PSP device, then start an internet game.
To Next Page
Loading...
