TP-Link TL-WPS510U Hardware Installation

1
Please prepare the following items
 One USB Printer (non-GDI/CAPT)
 One 802.11n Access Point/Router cess Point/Router
 One Computer with Wireless Adapter installed  One Computer with Wireless Adapter installed
Hardware Installation Hardware Installation
1. Power off the printer. 1. Power off the printer.
2. Connect the print server to your printer with the provided printer cable. The
following figure is the classic topology for reference:
2. Connect the print server to your printer with the provided printer cable. The
following figure is the classic topology for reference:
3. Power on the printer.
4. Power on the print server.
5. Wait 40 seconds for the print server’s Power On Self Test (POST).
Factory Default Settings
 Username: admin
 Password: admin
 Wireless Mode: Ad-Hoc (Peer-to-Peer)
 Channel: 1
 SSID: WLAN-PS
 IP Address: 192.168.0.10
 Subnet Mask: 255.255.255.0
Before you start, please make sure all the computers that want to share the
printer have successfully installed the printer driver. For details, please refer to
your printer’s installation guide.
Note

TP-Link TL-WPS510U Specifications

General

Modulation	CCK, OFDM
Antenna type	External
Wi-Fi data rates	54 Mbit/s
Security algorithms	WPA, WPA-PSK, WPA2, WPA2-PSK
Networking standards	IEEE 802.11b, IEEE 802.11g
Network connection type	Wireless LAN
Antenna gain level (max)	2 dBi
Supported protocols	TCP/IP, LPD/LPR
Compatible operating systems	Win 2000 / XP / 2003 / Vista Mac OS X 10 + Linux
Non-operating relative humidity (non-condensing)	0 - 80 %
DC-in jack	Yes
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	-
Supported network protocols	TCP/IP, IPX/SPX, NetBEUI, AppleTalk, LPR/LPD, IPP
Storage temperature (T-T)	-5 - 65 °C
Operating relative humidity (H-H)	0 - 70 %
Certification	CE, FCC
Internal	No
Product color	White, Black
LED indicators	Power, WLAN
Package depth	168 mm
Package width	207 mm
Package height	68 mm
Package weight	300 g
Quantity per pack	1 pc(s)
AC adapter output current	2 A
AC adapter output voltage	3.3 V

Weight and Dimensions

Depth	40 mm
Width	65 mm
Height	20 mm
Weight	45 g